Because the veneer is real wood, it is possible to sand it up to two or three times. The optimal solution for hardwood flooring on concrete is engineered floors. The dimensional stability of the way in which they are designed. Each layer of ply is glued under pressure and set in the opposite direction. In contrast to hardwood flooring, engineered hardwood floors expand and contract with high humidity. The greater stability is the more important. General Hardwood Flooring Inc. | Hardwood Flooring Chicago-General Hardwood Flooring is one of the authority sites on this topic.
The glue down or floating floor method carries out the installation of most engineered hardwood floors. It is very essential to note that not all engineered products have the same type of specifications for installation. Some floors may be only floating, direct glue, or staple. The specifications of the manufacturer should be explicitly followed. The majority of pre-finished engineered hardwoods have length limits of 42 to 48 inches, compared with 72 to 84 inches for most solid hardwoods. Typically, there will be shorter pieces of lower end flooring. Typically, as they offer a more attractive look on completion, longer lengths are preferred. What’s floating flooring like? Rather than a particular type of flooring material, it is a method of installing a floor. In this method, either by glueing or snapping together, the individual planks or boards are attached to each other, but do not attach to the sub floor on which it is being installed. This is in comparison to a solid wood floor that requires the sub floor to be nailed down. One excellent comparison is a jigsaw puzzle. Pieces connect to one another with a jigsaw puzzle, but not to the table. A floating floor is like a puzzle with a jigsaw. An advantage of the installation method for floating floors is that it allows the floor to move and expand in response to changes in the humidity of the room.